08-05-2023, 08:08 AM
question EC770 "A network administrator must configure router B to allow traffic only from network 10.100.2.0 to networks outside of router B. Which configuration must be applied?"
It is a radial button selection and your answer is highlighting two different answers...
the correct answer is not displayed in the text it should be
"D. RouterB(config)# access-list 101 permit ip 10.100.2.0 0.0.0.255 any
RouterB(config)# int g0/0/0 -
RouterB(config-if)# ip access-group 101 out
RouterB(config)# int g0/0/1 -
RouterB(config-if)# ip access-group 101 out"
Check https://www.examtopics.com/discussions/c...iscussion/
It is a radial button selection and your answer is highlighting two different answers...
the correct answer is not displayed in the text it should be
"D. RouterB(config)# access-list 101 permit ip 10.100.2.0 0.0.0.255 any
RouterB(config)# int g0/0/0 -
RouterB(config-if)# ip access-group 101 out
RouterB(config)# int g0/0/1 -
RouterB(config-if)# ip access-group 101 out"
Check https://www.examtopics.com/discussions/c...iscussion/