QIDRTE572

[BManager]

QIDRTE572

should be Router Subcommand i think?

to enable rip you type in the global config: 

Router rip
the question says on a link so that is already in the router mode to enable on a link you type the network command

network 10.10.10.1 

R3(config)#
R3(config)#router rip
R3(config-router)#network 10.1.1.5

[ugly9727]

I agree. If it says on a interface, it should be in the router sub command by including network statement. If its just enabling routing protocol then its global.