03-03-2011, 01:06 PM
Hi rauf1212,
r u looking for cabling connection or actual configuration?
If cabling - then use straight cable between pc and switch and also between router and switch. As router and pc are straight device, when they talk to router, they need straight cable due to switch is cross device.
if configuration issue, set up a ip address on pc (static if no dhcp), setup ip on router interface, make sure both ip should be in same subnet. Default gateway on PC nic should be the routers ip address.
hope this will help.
r u looking for cabling connection or actual configuration?
If cabling - then use straight cable between pc and switch and also between router and switch. As router and pc are straight device, when they talk to router, they need straight cable due to switch is cross device.
if configuration issue, set up a ip address on pc (static if no dhcp), setup ip on router interface, make sure both ip should be in same subnet. Default gateway on PC nic should be the routers ip address.
hope this will help.