Distributed CEF (dCEF) mode - When dCEF is enabled, line cards maintain identical copies of the FIB and adjacency tables. The line cards can perform the express forwarding by themselves, and this relieves the main processor - Gigabit Route Processor (GRP) - of involvement in the switching operation. This is the only switching method available on the Cisco 12000 Series Router.

https://www.cisco.com/c/en/us/support/do...scoef.html

Question AN310 asks, "What describes the operation of virtual machines?" 

The answer marked correct is, "In a virtual machine environment, physical servers must run one operating system at a time."

How can this be?  I think a more correct answer in this question was "Virtual machines are operating system instances that are decoupled from server hardware." 

Any help, or correction of this from H2P would be appreciated.

Hi,

For me, on the AR376, it's the "set ip defaut next-hop" who generates a PBR function only if the destination network is not present in routing table :
https://www.cisco.com/c/en/us/support/do...ds-ce.html

Do you agree ?

Thanks for your Feedback !

hello folks,

i passed i few days ago and tests are including lab sims currently (in my exam i hit 3 of them).

how2pass was very helpful.

ty!

Are these questions' answer wrong?

Do you guys comb through your Study guide to verify all the questions and answers are correct before posting them?

What is a function of Wireless LAN Controller?

A. register with a single access point that controls traffic between wired and wireless endpoints
B. use SSIDs to distinguish between wireless clients
C. send LWAPP packets to access points
D. monitor activity on wireless and wired LANs


Which answer is correct? Your site says its B but searching the web others is saying C

An explanation with relevant citations is desperately needed for this question.

QID:AN197

What is a function of Wireless LAN Controller?

A. register with a single access point that controls traffic between wired and wireless endpoints
B. use SSIDs to distinguish between wireless clients
C. send LWAPP packets to access points
D. monitor activity on wireless and wired LANs

I'm getting conflicting answers when researching online. Your Test says its B but I'm seeing a lot that C is the actual answer. Which one is it?

There are too many incorrect answers to the questions.  And this is not unique to how2pass.  The other sites I used had the same issues.  Don't waist your time on this exam.  Try one of the others.