How do you change the MAC address into numbers so that you can add it to the Priority?


Thank You

Hey guys,
I was wondering if someone could help explaining the answer to QID:NA609???

I always thought that eq Telnet and eq 22 couldn't go mid ACL statement? Why is the answer SSH is possible but Telnet is not? Please help!

Thanks!  ;D

problem is not to advertise s0/0/0 and its connected eigrp stub router to another network directly connected. the solution is not include int s0/0/0 in the network command but i think in this case the stub router won t be eigrp neighbor anymore. i d rather use a distribute list to filter the prefixes. can someone provide me with an explanation to this?
appreciate any help
thanks

56 questions, 3 sims, 1 simlet, 1 drag and drop.

The 3 sims were EIGRP Stub, OSPF virtual-link and EIGRP to OSPF redistribution, which can be found here: http://www.digitaltut.com/bsci-lab-sim/34-bsci-eigrp-ospf-redistribution-sim

The simlet was the EIGRP one, but with different values, but the same concept. The drag and drop is a brand new one regarding building an OSPF environment and has 4 different answers. I do know that three of the answers are OSPF summary boundaries, Process ID, and area types and prefixes. I was able to guess the fourth one correctly so use common sense.

As for the 51 multiple choice questions, every single one of them were from How2Pass.

Thank you so much How2Pass, I couldn't have done it without you!

Good luck to all, hope this helps everyone trying to get this done before the cutoff date.

Hi,

http://sites.google.com/site/questionscert/home

on image above all in red square is under my administration.
There is only 1 way to enter outside to "internet".

pc A can reach the webserver using gateway router and isp : I am using Nat to do this.
pc B and C can't reach this webserver, Where do I need to place NAT to get this working on both router B and C or on gateway router
In case it is on gateway router do I then need to user router B and C ip address as source address or pc B and C as source address
I am currently studying for my ICND 2 and just came accross NAT.

um i got a 1000 /1000 with 39 min. left 

i took the cisco netacad classes over 4 semesters in college and my teacher linked me to this site.  it was very helpful. This site teaches you the flow of the test, what things to look for in each type of question. will be coming back for the re-cert

had 50 questions

had the stp/vtp sim , eigrp sim, and ACL sim 

knowing your way around the IOS* will be very helpful, there was a question in the stp sim where I forgot the one* command to show some thing , I thought about it and used 3 different commands and assumed some things and got the right answer. 

can t understand this answer: to me both r3 and r5 did not reply to the query sent.

can someone help?

can some one remotely explain what is going on 

10.1.5.64/28
10.1.5.64/29
10.1.5.64/27

would be in the same network and cant be used in different ports on the router

Overall, the exam wasn't as bad as I thought it would be.  I used H2P for my CCNA, so I knew they were good, but I guess I thought this would be different.  Don't mean to beat a dead horse here but just like everyone else has said, if you study each of the sections enough to where you're passing 90%+ of the questions, you'll be good on the exam.

I had lab 5, 6, and a new one that Nikisal already mentioned that involved redistribution between OSPF and EIGRP with a dual-homed setup.  I can't remember exactly what the question is but it looked like we needed to configure a NSSA area and then tweak the metrics to prefer the link with the higher bandwidth.  However, when I tried to configure the NSSA on the area under the router ospf config mode, it kept saying "invalid command."  When I did a ? after area, nothing showed up, although the ? worked with everything else I tried.  This was my 3rd question I got, so I skipped the question after 15 minutes of trying to work at it.  I'd be curious what the solution was too.

Other than that, I had the EIGRP simlet that asks what routes would be preferred with the specified successor, etc.  There were a few questions I came across that I hadn't seen before but looking at my score breakdown, I apparently got them correct as they were mostly BGP and ISIS questions, and I scored 100% on both of these sections. 

Next stop:  SWITCH.

passed today with a 860.....got stuck on a new lab with eigrp and ospf redistribution.  did not get it to work and skipped it.
dont really know what the solution is yet.