Dear all,

I'm please to share you a GNS3 course. The videos has been uploaded to youtube.

PART1
http://www.youtube.com/watch?v=-GwomBC0vwc

PART2
http://www.youtube.com/watch?v=SWafA4SxMJw



GNS course
http://grook.net/forum/it-infrastructure/network/gns3-course

I'm 16 ;D and I've been studying toward this exam thoroughly since school ended in mid-June. Before this summer, I was quite the newbie when it came to networking. For my preperation, I purchased the CCNA ExamCram book by Michael Valentine and Andrew Whitaker, viewed all of Chris Bryant's YouTube vids (http://www.youtube.com/user/ccie12933), practiced on a dynamips simulated router, and of course, how2pass.  I gotta say though, how2pass was by far the best study tool that anyone could use. The ExamCram book, though very informative and easy to grasp, was replete with so many mistakes! It honestly was ridiculous. If you intend to buy that book I highly recommend verifying what you have learned with a reputable source. I read one chapter, watched the corresponding video, and did the corresponding how2pass test (all questions for that section). After I exhausted all the non-sim how2pass questions, I did sections I had most trouble with once more (Test #s 1,2,5, and 9). The day before the test, I completed each of the router simlet/simulators/testlets three times over.

Now to the test...
I had 50 questions, 90 minutes each. Seriously, I'd say about 30-40 of the questions some variant of the how2pass questions. I'd advise anyone whose taking it anytime soon to go through the recently added questions the day of the test (Test 12) as most of the questions I encountered were from here. I had two simulations and one simlet. The simlet regarded VTP/VLANS/STP and was extremely easy if you had done and studied from QID:S14. The simulations were EIGRP related (QID:S16) and Access-list related (QID:S17). These simulations were almost exactly how it appeared in how2pass, except for the scenarios provided. I had a couple tricky questions about cable types and WLAN security but again, I had seen something like it somewhere on how2pass. The subnetting questions were extremely few and extremely easy if you've read the http://subnettingmadeeasy.blogspot.com by Chris.

For those of you who are concerned that auto-TAB is not available during the exam, thats not a problem. Just put a "?" in the middle of the command and it will give a list of choices that essentially works just the same as auto-TAB.

I finished the exam with a solid 45 minutes remaining. So my advice would be not to worry to much about being pressed for time. Just focus on getting the question right. Write everything you remember down onto the piece of paper they give you prior to the exam. Also, if the Expo marker stops working, don't be afraid to ask your proctor for another one

I think the best aspect about how2pass is the elaborate explanation they provide so you actually understand the concept behind what you got wrong, as opposed to memorizing the correct answer. That, as well as the number of questions they provide. And I'm not just saying that because this is their forum and all (which incidentally is also very helpful; those of you using a guest profile, get a real one! interact your fellow CCNA aspirants/experts!).

I hope I havn't violated any forum rules, and thanks how2pass!

passed CCNA today i've got 1000/1000...thanks h2p!

I passed the CCNA 640-802 with a score of 961 today and 25 minutes remaining.

Had 50 questions with 3 sims, VLAN/STP, EIGRP routing and a ACL sims.  There were 3 questions on IPv6, one was EUI-64.  Make sure you can subnet quickly and summarize routes before taking the exam as they could cost you too much time if you are slow.

I spend 5-6 weeks in my spare time reading both the Exam Prep CCENT and Exam Cram CCNA books from QUE publishing, then went through all the questions on how2pass and also setup a small lab at home.  How2pass is well worth the money and I'll be using it again for CCNP and CCNA-Security if if they become available.

quite easy actually
if you get 92/95% on H2P random test you should not have any problem

or at least no one answer to me i saw answers on other questions
i made 4 posts and no reply are my questions too stupid to deserve an answer?
or are they just too much for your understanding?
just someone tell me something
tomorrow i have my exam and still have lot of doubts

Took exam 640-816 to re-new CCNA certification. Passed with score of 1000. Thanks to H2P!

Reviewed H2P questions twice and Used Cisco Packet Tracer. Had 2 simlets. 1) Had the VTP and basic switch info, 2)Had to config OSPF to work with the other routers that where connected.

Review H2P , know the basics and go take the test!

question is how many routes will have an eigrp router installed in its routing table when it has only one neighbor sending to it a manual summary route. the answer i would give is 2 (it is supposed to have the summary and the connected route) but it is not even an option.
right answer according to H2P is 1!!!
how can it be ???
i think this is wrong
can this time someone help me??????
pleeeeeeeeeeeeaaaaaseeeeeeeeee

Passed the last test for CCNP (ISCW) Friday.
Made it under the wire.
Good luck to all...
Ted

i've been using H2P for more than 2months .. wish i could nail the CCNA exam! Wish me luck..