I submitted two (of what I believe to be) incorrect answers in the CCNA quiz another post and am seeing a 3rd wrong now.  The top two may have been changed but I didn't see a response .

QID:AN729 - I believe answer is point to point, not broadcast
QID: AN736-  PAcked sourced from 10.10.10.32.   Answer should be 1, you had 0.
QID:AN342 -  You have that the router replaces the original source and destination MAC address.  Routers don't use MACs, only IP.

I could have these wrong but if not, can you please put an explanation of how you got your answers. I investigated and couldn't find anything.

Hi,

Cisco making changes to CCNP exam sept 20, will how2pass update as well. I plan on taking exam in October. Do I also have to pay for new product? I have Encore 350-401 already.?

Passed

Distributed CEF (dCEF) mode - When dCEF is enabled, line cards maintain identical copies of the FIB and adjacency tables. The line cards can perform the express forwarding by themselves, and this relieves the main processor - Gigabit Route Processor (GRP) - of involvement in the switching operation. This is the only switching method available on the Cisco 12000 Series Router.

https://www.cisco.com/c/en/us/support/do...scoef.html

Question AN310 asks, "What describes the operation of virtual machines?" 

The answer marked correct is, "In a virtual machine environment, physical servers must run one operating system at a time."

How can this be?  I think a more correct answer in this question was "Virtual machines are operating system instances that are decoupled from server hardware." 

Any help, or correction of this from H2P would be appreciated.

Hi,

For me, on the AR376, it's the "set ip defaut next-hop" who generates a PBR function only if the destination network is not present in routing table :
https://www.cisco.com/c/en/us/support/do...ds-ce.html

Do you agree ?

Thanks for your Feedback !

hello folks,

i passed i few days ago and tests are including lab sims currently (in my exam i hit 3 of them).

how2pass was very helpful.

ty!

Are these questions' answer wrong?

What is a function of Wireless LAN Controller?

A. register with a single access point that controls traffic between wired and wireless endpoints
B. use SSIDs to distinguish between wireless clients
C. send LWAPP packets to access points
D. monitor activity on wireless and wired LANs


Which answer is correct? Your site says its B but searching the web others is saying C

An explanation with relevant citations is desperately needed for this question.