QID:AN197

What is a function of Wireless LAN Controller?

A. register with a single access point that controls traffic between wired and wireless endpoints
B. use SSIDs to distinguish between wireless clients
C. send LWAPP packets to access points
D. monitor activity on wireless and wired LANs

I'm getting conflicting answers when researching online. Your Test says its B but I'm seeing a lot that C is the actual answer. Which one is it?

There are too many incorrect answers to the questions.  And this is not unique to how2pass.  The other sites I used had the same issues.  Don't waist your time on this exam.  Try one of the others.

No images are coming up on this drag and drop question.

"Error: Drag and drop question settings or resource not found.

Can we get his fixed ASAP!

Thank you very much How2Pass! 
I took the exam today and passed. There were 97 questions altogether for me, including three Router Simulations; each of them has three tasks assigned. How2Pass' questions are valid. Cheers

Can anyone explain why the answer to this question is B-Change the timezone on the vSmart to Europe/London?   At least according to How2pass.
Others say that D-Reconfigure the system-ip parameter on vSmart to 11.1.1.2.  I don't understand that one either because it already is configured with that IP.
The only right answer I see is to change the IP address in vBond to 11.1.1.3/24 to match the subnet masks in vManage and vSmart.  But, that isn't an options.
Thoughts?

Good day,
I wanted to check to see if anyone has recently taken the ENARSI test. I am planning on taking it in 1st week of August.

Thanks,

Hi
There appears to be several wrong answers

Answer Ec849 appears to be enable AAA overide check for opions
https://www.examtopics.com/discussions/c...iscussion/
Also a Google on AAA overide comes back with dynamic vlans


There is also EC546 for Stackwise.
9 x 9200s can be stacked https://www.cisco.com/c/en/us/products/c...te-en.html
The stackwise cables are proprietary
https://www.cisco.com/c/en/us/products/c...te-en.html


ec793
The answer is wrong.
It should be
"AAA New-Model
AAA authentication login default group RADIUS"

ec686
https://www.examtopics.com/discussions/c...iscussion/
It should not be "On R3" that would prevent all areas from receiving the advertisement
It should be applied to R1 to prevent R3 from receiving the LSA
The diagram should also show area 1 and area 2

Please can these be checked.

Passed the exam today, how2pass material helped a lot at least in my exam just three or four new questions one of them I remember it was drag and drop and related to add a server using tacacs process configuration but it was easy one very intuitive.

Good luck for all.

Loos like the last update was May 24th.  Are their plans to update the questions?

Thanks!!!

There is a broken link in question EC816.  The image link in the Exhibit is broken and not showing anything.

Can we get that fixed?